Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
  • Load image into Gallery viewer, Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
  • Load image into Gallery viewer, Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
  • Load image into Gallery viewer, Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
  • Load image into Gallery viewer, Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
  • Load image into Gallery viewer, Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)

Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)

Regular price
$11.00 USD
Sale price
$11.00 USD
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

DESCRIPTION FITMENT SHIPPING & RETURNS PART NUMBER(S) ADDITIONAL INFO
DESCRIPTION

85 Degree Enkei Metal Valve Stems for Motorcycles (and Cars) - Package of 2

When space is tight and you need access to the valve stem, an 85 degree valve stem is just the ticket.  This valve stem provides all you need at the best price possible.  All metal construction with double seal for the best sealing for an angled valve stem.

Enkei 85 degree angled 90 degree Main Enkei 85 degree angled 90 degree Installed 1
Features:
  • 85 degree bend for easy access to valve around brake disc's, drive chains.
  • 2 Valves per package
  • Valve weight: 28g
  • Size: 11.3mm (0.453") Rim Hole Opening.
  • Low profile design.
  • All metal construction.
  • Double air seal for the best sealing possible.
  • Double internal locking nuts keeps everything together.
  • Metal Valve Cap included.
  • Rated to 200psi
Fitting: These valve stems fit most Japanese and American Motorcycles with a standard 11.3mm (0.453") rim hole opening.
  • Some Italian and some older European motorcycles use a 8.3mm (0.327") rim hole. 
  • These parts will not work for these applications.
  • Please check before ordering
Assembly Instructions:
  1. Remove both locking nuts, one washer and lower seal from valve stem (See picture below)
  2. Clean both valve housing and inside and outside of valve stem hole on rim.
  3. Insert valve onto rim, taking care not to damage the gasket at the base of the valve stem.
  4. Re-Attach lower seal, washer and one locking nut.
  5. Tighten first locking nut to 2.25Nm (20in-lb) to 4.5Nm (40in-lb), then attach second nut to double lock valve stem on motorcycle.
Note:  Excessive torque may deform and/or damage the rubber seal gasket.
Enkei 85 degree angled 90 degree parts Enkei 85 degree angled 90 degree Installed 2
FITMENT
SHIPPING & RETURNS
PART NUMBER(S)
ADDITIONAL INFO