Body Plug Size 1 inch 3 Pack
Body Plug 1 Inch 3 Pack
Body Plug Size 1 inch 3 Pack
Body Plug 1 Inch 3 Pack

Body Plug - Size: 1in - 3 Pack

$2.00 USD
/
Shipping calculated at checkout.
  • In stock
  • Inventory on the way
DESCRIPTION FITMENT SHIPPING & RETURNS PART NUMBER(S) ADDITIONAL INFO
DESCRIPTION
3 pack of 1 inch Belly Pan Plugs (AKA: Body Plugs)
Setup your fiberglass racing lower with two AMA legal drain plugs. Setup your enclosed belly pan for both Dry and Rain racing conditions.
Features:
  • 3pcs Kit: 2 Plugs + 1 Spare Plug

  • 1.00 in (25.40 mm) Plug size for AMA & CCS rain race drain hole size.
    • Check your local racing organization rule book for maximum allowed drain hole size before ordering!!!
  • Snap In Design
  • Designed for Fiberglass Bodywork between 1.5mm ~ 2.5mm thick
  • Material: Low Density Polyethylene
  • Color:  Black (No other colors available)
 Body Plug - Main Image
Dimensions:
  • Hole Size : 1.00 in (25.40 mm)
  • Dim A : 0.25 in (6.35 mm)
  • Dim B : 1.38 in (35.06 mm)
  • Dim C : 1.04 in (26.42 mm)
 Body Plug - Drawing
Suggested Installation Procedure:
  • Step #1 :  Locate front and rear plug hole locations.
  • Step #2 :  Drill a 1.00 in (25.40 mm) Diameter hole
    • A stepped drill bit is RECOMMENDED to create a clean and burr free hole in fiberglass bodywork.
    • Note: A Spade drill bit or a hole saw may leave a rough hole edge and effect plug installation. These hole drilling methods are not recommended.
  • Step #3 : Using Sanding Block, smooth the hole edge surface inside and outside belly pan.
  • Step #4 : Install Plugs in hole, plug edge should lay almost flat once installed
  • Step #5 (Optional) : Using a 2in x 2in piece of Duct/Fabric Tape, cover the body plug for a secondary retention system.
FITMENT
SHIPPING & RETURNS
PART NUMBER(S)
ADDITIONAL INFO

You may also like

Recently viewed