Enkei - 85 Degree Angled Metal Valve Stem - Set (2pcs)
[ENK85D]

$11.00

When space is tight and you need access to the valve stem, an 85 degree valve stem is just the ticket.  This valve stem provides all you need at the best price possible.  All metal construction with double seal for the best sealing for an angled valve stem.

Features:	85 degree bend for easy access to valve around brake disc's, drive chains. 2 Valves per package Valve weight: 28g Size: 11.3mm (0.453") Rim Hole Opening. Low profile design. All metal construction. Double air seal for the best sealing possible. Double internal locking nuts keeps everything together. Metal Valve Cap included. Rated to 200psi
Fitting:	These valve stems fit most Japanese and American Motorcycles with a standard 11.3mm (0.453") rim hole opening. Some Italian and some older European motorcycles use a 8.3mm (0.327") rim hole.  These parts will not work for these applications. Please check before ordering
Assembly Instructions:	Remove both locking nuts, one washer and lower seal from valve stem (See picture below) Clean both valve housing and inside and outside of valve stem hole on rim. Insert valve onto rim, taking care not to damage the gasket at the base of the valve stem. Re-Attach lower seal, washer and one locking nut. Tighten first locking nut to 2.25Nm (20in-lb) to 4.5Nm (40in-lb), then attach second nut to double lock valve stem on motorcycle. Note:  Excessive torque may deform and/or damage the rubber seal gasket.