Tygon 2075 / 2375 Tubing - ID: 5/16in (8mm) - AJK00022
[AJK00022]
$6.00 $5.50
Tygon 3rd Generation 2075 Tubing - Tygon 2375 - Size: - P/N:
5/16in ID - AJK00022 (Replaces AED00022) - Clear
| Tygon 3rd Generation 2075 Tubing - Tygon 2375
- ID: 5/16in (8mm) |
| P/N: AJK00022 (Replaces P/N: AED00022) |
- Tygon 3rd Generation
of 2075 Tubing has a new ID Number of 2375. This 2375
Tygon tubing is an even better version of their Ultra
Chemical Resistant Tubing.
- Tygon 2375 is a
clear flexible tubing that is virtually unaffected by
acids, bases, ketones, salts and alcohols.
- Many racers use this
tubing for non pressurized brake fluid connections,
for example connecting your remove reservoir to your
master cylinder or to replace the reservoir all
together.
|
| 1 Order = Tubing
Length of: 1 Foot (12in / 30.2cm) - All multiple
orders will come as a single piece (maximum of 25 feet). To Order More than 1
Foot, Place the Tygon Tubing in the shopping cart
and increase the quantity to the length you want in 1 Foot
Increments. |
Part
Information:
Part Number: AJK00022
(Replaces AED00022)
Tubing Length: 12in
(30.5cm)
Tubing Inside Diameter: 5/16in (7.94mm)
Tubing Outside Diameter: 7/16in (11.11mm)
Minimum Bend Radius: 1-1/4in
(31.75mm)
Note:
Tubing compatible with most 8mm fittings
Link: Comparison
Tygon 2075 vs Tygon 2375
|
|
- Resistant to MEK and other highly aggressive
chemicals:
- Tubing is virtually unaffected by acids, bases,
ketones, salts and alcohols (See chart below)
- Contains No Plasticizers:
- Prevents fluid contamination from leaching
plasticizers - a common occurrence with other flexible
tubing.
- Eliminates premature cracking of embrittlement due
to plasticizer extraction.
- Extremely smooth inner surface: Inhibits particulate
build-up.
- Hydrophobic property reduces absorption of aqueous
fluids
- Minimal out gassing from tubing
|
|
|
|
|
|
Tygon
tubing
installed
on Front and Rear M/C
> Tubing Plug is a Honda P/N: 17370-419-700 <
|
|
FAQ:
|
 Question #1: Do you sell the plug shown in
the pictures on the sales page.
Answer: No we do not sell
the Honda Plug, because we would have to charge you more
than the actual plug costs.
- You can order the plug from any
Honda Car or Motorcycle Dealer.
- The P/N is 17370-419-700, and the
cost should be $2 to $3 for the plug.
- Plug fits best the 5/16in (8mm)
P/N: AJK00022 Tygon 2375 Tubing (The listing you are looking at right
now).
- The plug may be a VERY SNUG fit
when used with the 1/4in (6.35mm) P/N: AJK00017 Tygon
2375 Tubing
|
 Question #2: Do you sell that thin
Reservoir bracket. - or - Do you carry the
"LadyBird" Reservoir bracket?
Answer: Yes, We have our own version of the
"LadyBird" style Reservoir bracket.
|
Question
#3:
Can
the
Tygon 2075/2375 Tubing be used for Non Pressurized Fuel
Lines?
Answer: Tygon 2075/2375 Tubing is no recommended by the
manufacture for Fuel lines.
- Option #1: Use Tygon F-4040-A
Fuel Line, as this is the Tygon Fuel Line Application.
- Option #2: For Clear lines,
the Tygon SE-200 Ultimate can be used for Fuel Line
Applications:
|
Question
#4: Can Tygon 2075/2375 tubing be used on Brakes and
Clutches that use mineral oil, in place of DOT Hydraulic
Fluid?
Answer: Some KTM users have reported that the
Mineral Oil used with the Clutch hydraulic system is not
compatible with Tygon tubing.
|
 |
|
|
