Tygon 2075 / 2375 Tubing - ID: 1/4in (6.35mm) - AJK00017
[AJK00017]
$6.00 $5.50
Tygon 3rd Generation 2075 Tubing - Tygon 2375 - Size: - P/N:
1/4in ID - AJK00017 (Replaces AED00017) - Clear
Tygon
3rd
Generation 2075 Tubing - Tygon 2375 - ID: 1/4in
(6.35mm)
|
P/N:
AJK00017
(Replaces P/N: AED00017) |
- Tygon 3rd Generation of 2075 Tubing
has a new ID Number of 2375. This 2375 Tygon tubing is
an even better version of their Ultra Chemical
Resistant Tubing.
- Tygon 2375 is a clear flexible
tubing that is virtually unaffected by acids, bases,
ketones, salts and alcohols.
- Many racers use this tubing for non
pressurized brake fluid connections, for example
connecting your remove reservoir to your master
cylinder or to replace the reservoir all together.
|
1 Order = Tubing
Length of: 1 Foot (12in / 30.2cm) - All
multiple orders will come as a single piece (maximum of
25 feet). To
Order More than 1 Foot, Place the Tygon Tubing
in the shopping cart and increase the quantity to the
length you want in 1 Foot Increments. |
Part
Information:
Part Number: AJK00017 (Replaces AED00017)
Tubing Length: 12in (30.5cm)
Tubing Inside Diameter: 1/4in (6.35mm)
Tubing Outside Diameter: 3/8in (9.525mm)
Minimum Bend Radius: 3/4in (19mm)
Note: Tubing compatible with most
6mm fittings
Link:
Comparison
Tygon
2075
vs
Tygon
2375
|

 |
- Resistant to MEK and other highly
aggressive chemicals:
- Tubing is virtually unaffected by
acids, bases, ketones, salts and alcohols (See chart
below)
- Contains No Plasticizers:
- Prevents fluid contamination from
leaching plasticizers - a common occurrence with
other flexible tubing.
- Eliminates premature cracking of
embrittlement due to plasticizer extraction.
- Extremely smooth inner surface:
Inhibits particulate build-up.
- Hydrophobic property reduces
absorption of aqueous fluids
- Minimal out gassing from tubing
|
|

|
|
Tygon
tubing
installed
on Front
and Rear M/C
> Tubing Plug is a Honda P/N: 17370-419-700 <
|
FAQ:
|
Question #1:
Do
you sell the plug shown in the pictures on the sales page?
Answer: No we do not sell the Honda Plug,
because we
would have to charge you more than the actual plug costs.
- You can order the plug from any
Honda Car or Motorcycle Dealer.
- The P/N is 17370-419-700, and the
cost should be $2 to $3 for the plug.
- Plug fits best the 5/16in (8mm)
P/N: AJK00022 Tygon 2375 Tubing; [LINK]
:
To
the
AJK0022 listing (CLICK HERE).
- The plug may be a VERY SNUG fit
when used with the 1/4in (6.35mm) P/N: AJK00017 Tygon
2375 Tubing
|
Question #2:
Do
you sell that thin Reservoir bracket. - or - Do
you carry the "LadyBird" Reservoir bracket?
Answer: Yes, We have our own version of the
"LadyBird" style Reservoir bracket.
|
Question
#3:
Can
the Tygon 2075/2375 Tubing be used for Non
Pressurized Fuel Lines?
Answer: Tygon 2075/2375 Tubing is no recommended by
the
manufacture for Fuel lines.
- Option #1: Use Tygon F-4040-A
Fuel Line, as this is the Tygon Fuel Line Application.
- Option #2: For Clear lines,
the Tygon SE-200 Ultimate can be used for Fuel Line
Applications:
|
Question
#4: Can Tygon 2075/2375 tubing be used on Brakes and
Clutches that use mineral oil, in place of DOT Hydraulic
Fluid?
Answer: Some KTM users have reported that the
Mineral Oil used with the Clutch hydraulic system is not
compatible with Tygon tubing.
|
 |
|
 |